1. Ingredients, according to the designed material list, weigh the various raw materials and mix them evenly in a blender. The main raw materials of glass bottle manufacturers are: quartz sand, limestone, feldspar, soda ash, boric acid and so on.
2. Melt, the prepared raw materials are heated at a high temperature to form a uniform bubble-free glass liquid. This is a very complicated physical and chemical reaction process. The melting of the glass takes place in the furnace. There are two main types of melting furnaces: one is a kiln, and the glass is contained in the crucible and heated outside the crucible. The small kiln only puts one cockroach, and the big one can have up to 20 cockroaches. The kiln is produced in a gap-type manner, and now only optical glass and color glass are produced in the kiln. The other is a pool kiln in which the frit is melted and the open flame is heated on the upper side of the glass. The melting temperature of glass is mostly between 1300 and 1600 ゚C. Most of them are heated by flames, and a small amount is heated by electric current, which is called electric melting furnace. Now, the pool kiln is continuously produced. The small pool kiln can be several meters, and the large one can be as large as 400 meters.
3. Forming is the conversion of a molten glass liquid into a solid product having a fixed shape. Forming must be carried out within a certain temperature range. This is a cooling process in which the glass first changes from a viscous liquid state to a plastic state and then to a brittle solid state. The forming method can be divided into two major categories: manual forming and mechanical forming.
A. Artificially formed. There is also (1) blowing, blowing a tube with a nickel-chromium alloy, picking a glass of glass and blowing it while turning in the mold. Mainly used to form glass bubbles, bottles, balls (for ophthalmic lenses) and so on. (2) Pulling, after blowing into small bubbles, another worker sticks with the top plate, and the two are mainly used to make glass tubes or rods while blowing. (3) Pressing, picking a glass of glass, cutting it with a scissors to drop it into the die, and then pressing it with a punch. Mainly used to form cups, plates, etc. (4) Freeform forming, after picking up materials, directly make crafts with tools such as pliers, scissors, and tweezers.
B. Mechanical forming. Since the artificial forming is labor intensive, high in temperature, and poor in condition, most of it has been replaced by mechanical forming except for free forming. In addition to pressing, blowing, and drawing, there are (1) calendering methods for producing thick flat glass, engraved glass, and wire glass. (2) Casting method to produce optical glass. (3) Centrifugal casting method for manufacturing large diameter glass tubes, vessels and large-capacity reaction pots. This is to inject the glass melt into a mold that rotates at high speed, and the glass is pressed against the wall of the mold due to centrifugal force, and the rotation continues until the glass is hardened. (4) Sintering method for producing glass foam bottles. It is a kind of good heat insulation and sound insulation material by adding a foaming agent to the glass powder and heating it in a covered metal mold. The glass forms many closed bubbles during the heating process. In addition, the flat glass is formed by a vertical lead method, a flat pull method, and a float method. The float method is a method in which a glass flow floats on a surface of a molten metal (tin) to form a flat glass. The main advantage is that the glass has high quality (flat, smooth), a high pulling speed, and a large output.
4. Annealing, the glass undergoes intense temperature changes and shape changes during the forming process, which leaves thermal stress in the glass. This thermal stress reduces the strength and thermal stability of the glass article. If it is directly cooled, it is likely to break itself during storage or transportation during the cooling process or later (commonly known as cold explosion of glass). In order to eliminate the cold explosion phenomenon, the glass article must be annealed after forming. Annealing is to heat or slowly cool for a period of time to eliminate or reduce the thermal stress in the glass to an allowable value.
In addition, glass bottle manufacturers indicated that certain glass products can be rigidified in order to increase their strength. Including: physical rigidification (quenching), for thicker glass, tabletop glass, automotive windshield, etc.; and chemical rigidification (ion exchange), for watch glass, aviation glass, etc. The principle of stiffening is to generate compressive stress on the surface layer of the glass to increase its strength.